Clean your house well after renovations | method, material, products

Do you want to do some renovation work? To prevent the site from turning into a nightmare and taking twice the time necessary, there are simple and effective ways to prepare your interior well and ensure that your house is cleaned perfectly after the work. Let's take a look at the few tips for cleaning your house properly after renovations.

For the professional cleaning services in Olympia. You can take the assistance of Premier Janitorial Services.

Beforehand, prepare your site well

Who says renovation site says preliminary preparation. And yes, you may not have the opportunity to leave your home while the work is being done, so you might as well prepare yourself. Whether you work yourself or call on craftsmen, the keyword will be to tidy up. Why? Simply because it is much easier to work quickly and well in an empty or space-saving space. So before you start your work, here is a list of things to think about.

1 - Free up space

Whatever the nature of the work (painting, plasterboard, wallpaper, etc.), you must try as much as possible to empty the room you plan to renovate. The best is to empty it completely, but it is sometimes difficult to remove everything if there is not enough space elsewhere in the house or apartment. If this is your case, leave only the large furniture in place. Place roller skates or extensions underneath; they will be easily moved around the room so as not to get in the way.

2 - Protect trinkets and clothing

Depending on the room being renovated, you may need to protect some things. This for two main reasons:

• Avoid the box.

• Keep your things from getting too much dust.

A simple way to avoid some mishaps with your personal effects is to put them in cardboard then tape polyane film (in the absence of the trash bags) around. Thus isolated, your belongings can be stored in a safe place.

3 - Cover the furniture and the floor

During the work, the furniture remaining in the room and the floor will see all the colors (dust, sprayed paint, glue, falling tools ...), so protect them effectively. It is advisable to put on old sheets or felt first to cushion in case of impact. Then you can cover it all with polyane film to minimize dust capture. Remember to fix the polyane or the tarpaulins with tape.

4 - Partition the workspace

If the room does not have a door or you are renovating only part of a large open room. It is preferable to partition to isolate the site from the rest of the accommodation. To do this, simply stretch polyane film between the ceiling and the floor. Secure it with staples or double-sided tape to be sure of the waterproofing and make an ugly overlap of at least 20 cm between each tarpaulin.

How to clean a site after work?

After a few weeks of work, that's it; your part is finished ... But it looks like a war zone! Dust, paint stain despite the protections, etc. It will now be necessary to clean it from top to bottom. First, you will have to ventilate the area where the work will have taken place. But be careful, remember to close the doors of the other rooms so as not to see the dust from the works coming where it has nothing to do.

Eliminate the dust and make the most of it

Have you just aired the room, and the dust that was still in the air is gone? Now you will have to remove most of the one on the floor and on the furniture. Leave the window open and start by removing the dust from the top of the furniture. Next, dust the sides of furniture and doors and finish with the floor. For effective floor cleaning, it is better to use a floor cleaner.

However, our advice, to avoid having a ton of dust to remove at the end of a job, is simply to sweep the broom at the end of each working day. This way, you will have much less time to spend on this tedious step.

Deep cleanse

Now that most of the dust is removed, you will undo all the protections put in place during the job to expose your furniture and floors. In this step, you will first vacuum from floor to ceiling to finish removing the last traces of dust. Be careful, however, not to use your household vacuum cleaner, which is not intended for vacuuming construction waste, in particular plaster dust. It could be fatal to him. Prefer to use a special construction site vacuum cleaner which has a suitable filter.

To clean the walls effectively, you can use a steam cleaner. These devices are very effective for the type of surface, even windows.

Eliminate stains

Last phase of cleaning: remove stubborn stains! First, try to rub with a cloth soaked in hydrogen peroxide or sparkling water. If the stain still does not come off (some paints are difficult to remove), you can use acetone-based nail polish remover. Be careful not use too much or to rub too much. These solvents could attack the substrate you are trying to clean and are harmful. Your best ally, in this case, will be the high-pressure cleaner to get rid of encrusted stains without the use of chemical household products.

For an impeccable finish and not to tire you by scrubbing, robot mops and floor cleaners can be your best friends for a successful end of construction.